transamsam98
Burning Out
member is offline
![[avatar]](http://thumb6.webshots.net/s/thumb3/2/67/93/156026793yJGFIM_th.jpg)
Joined: Jan 2008
Gender: Male 
Posts: 240
Location: calvert, maryland
Karma: 1 |  | got a pretty cool tech tip for yall
« Thread Started on Feb 17, 2009, 4:32pm » | ![[Quote]](http://s1.images.proboards.com/buttons/quote.gif) |
Ok well I installed a moser 9 inch in my 2000 trans am wich recuires a 1 inch longer driveshaft and 12 bolts require a 1 inch shorter driveshaft. well I looked around at prices and I cant afford a 400 driveshaft at the moment and I trusted a steel shaft over aluminum if it has to be a shorter shaft. So I picked up a steel shaft from a 96 and damn if the shaft itself wasnt a half inch longer than my aluminum one. So I measured the insert that goes into the transmision and found out the one on the aluminum one was a half inch longer than the one on the steel one. So once I swaped the snouts ($40 in u joints) I had my 1 inch longer shaft for my 9 inch and have a 1 inch shorted one that should work with a 12 bolt.
|
![[image]](http://i28.tinypic.com/egsro5.png) |
|
![[Home]](http://s1.images.proboards.com/menu/home.gif)
![[Help]](http://s1.images.proboards.com/menu/help.gif)
![[Search]](http://s1.images.proboards.com/menu/search.gif)
![[Login]](http://s1.images.proboards.com/menu/login.gif)
![[Register]](http://s1.images.proboards.com/menu/register.gif)
![[Search This Thread]](http://s1.images.proboards.com/search2.gif)
![[Reply]](http://s1.images.proboards.com/buttons/reply.gif)
![[Send Topic To Friend]](http://s1.images.proboards.com/buttons/sendtopic.gif)
![[Print]](http://s1.images.proboards.com/buttons/print.gif)
Author
Logged